Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   

Ranker Performance Summary
NETGEAR R8000P
Nighthawk X6S Tri-Band WiFi Router with MU-MIMO

Print 

Test Notes:
Revision 10 process using V1.1.3.2_1.1.74 firmware

# 7 for Total router (39.4)
# 7 for 2.4 GHz Avg. Throughput (4.5)
#5 for 2.4 GHz Avg. Downlink Throughput [49.5591 Mbps]
#4 for 2.4 GHz Avg. Uplink Throughput [54.2318 Mbps]
# 3 for 2.4 GHz Max. Throughput (2.5)
#2 for 2.4 GHz Max. Downlink Throughput [124.9 Mbps]
#3 for 2.4 GHz Max. Uplink Throughput [108.1 Mbps]
# 6 for 2.4 GHz Peak Throughput (5.0)
#3 for 2.4 GHz Peak Downlink Throughput [497.248 Mbps]
#7 for 2.4 GHz Peak Uplink Throughput [236.736 Mbps]
# 6 for 2.4 GHz Range (5.0)
#6 for 2.4 GHz Downlink Range [21.2 Mbps]
#4 for 2.4 GHz Uplink Range [30.4 Mbps]
# 7 for 5 GHz Avg. Throughput (6.5)
#10 for 5 GHz Avg. Downlink Throughput [96.9813 Mbps]
#3 for 5 GHz Avg. Uplink Throughput [236.431 Mbps]
# 8 for 5 GHz Max. Throughput (5.0)
#7 for 5 GHz Max. Downlink Throughput [203.1 Mbps]
#3 for 5 GHz Max. Uplink Throughput [568 Mbps]
# 4 for 5 GHz Peak Throughput (3.5)
#4 for 5 GHz Peak Downlink Throughput [636.506 Mbps]
#3 for 5 GHz Peak Uplink Throughput [680.642 Mbps]
# 4 for 5 GHz Range (5.5)
#8 for 5 GHz Downlink Range [37.7 Mbps]
#3 for 5 GHz Uplink Range [93.3 Mbps]
# 1 for TCP Throughput (1.0)
#1 for WAN to LAN Throughput - TCP [940 Mbps]
#1 for LAN to WAN Throughput - TCP [940 Mbps]
# 2 for HTTP Score (2.5)
#2 for HTTP Score - WAN to LAN [61.4 %]
#3 for HTTP Score - LAN to WAN [50.55 %]
# 2 for Bufferbloat (2.5)
#2 for Bufferbloat Score - Average Downlink [617 Score]
#3 for Bufferbloat Score - Average Uplink [477 Score]
# 3 for CTF Score (3.0)
#3 for CTF Score [58.8 %]
Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I currently just set up two new actiontec ecb6200 adapters in my house. The setup is only 2 splits from my main line that enters my house. One to my m...
Hello,I have disabled UI on http (80 port).And on 382.1_2 I had nginx server on router.But after upgrade to 384.3 I getCode: nginx: [emerg] bind() to...
Hi, newbie here.So I'm looking to buy a router for my mom's house. It's an L shaped one-story house. The router will be placed at the top of the L and...
Is there any chance that ac87u would support 384 firmware?
Hi there. I'm on asuswrt-merlin 380.69_2, the router is stock. I'm having terrible problems with streaming messages "00:26:86:00:00:00 no address conf...

Don't Miss These

  • 1
  • 2
  • 3