Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

This article is sponsored by NETGEAR.


Wi-Fi extenders have come a long way since the days of low speed, single band models that were hard to set up and often didn't get the job done. Today's products like NETGEAR's EX7300 Nighthawk X4 WiFi Range Extender cover both 2.4 and 5 GHz bands, use 802.11ac technology for Gigabit speed and support MU-MIMO that enables simultaneous streaming to multiple devices.

However, even the best of today's Wi-Fi extenders suffer from a common limitation, the need to share the extender's radios between connecting back to the router being shared and out to the devices the extender is trying to reach. The resulting competition for bandwidth often results in devices getting lower-than-expected speed, especially when extending today's high-bandwidth fiber and cable internet connections.

Traditional extenders share radios between front and backhaul

But no more.

NETGEAR has taken the Tri-band technology in its award-winning, best-selling Orbi Wi-Fi Systems and created the EX8000 Nighthawk X6S AC3000 Tri-Band WiFi Range Extender. The EX8000's advanced FastLane3 technology uses a dedicated high-bandwidth link between router and extender to create the world's fastest WiFi extender that works with any router. So if you're happy with your current router or can't change it, you can still use the EX8000 to improve Wi-Fi coverage and speed.

NETGEAR's EX8000 Tri-band WiFi has a dedicated router/extender link

The EX8000's dedicated 4x4 5 GHz radio automatically adapts to any router's 5 GHz capabilities, from entry-level 2x2 AC1200 up to top-of-line Tri-band 4x4 AC5400. It extends your current network, whether it uses a single network name (SSID) or one for each band, and helps devices seamlessly move, or roam, between router and extender. The EX8000's One WiFi Name feature works with any router to provide a seamless, single SSID network.

NETGEAR's EX8000 provides a single WiFi network for your entire house

Smart-Connect band-steering monitors signal level and activity on both bands and guides dual-band devices to the best connection. If a device supports IEEE 802.11k, the EX8000 does too, sharing information with the client so it can make an even better decision about the best connection.

Although the EX8000 works best with Tri-band routers that can dedicate a 5 GHz band to the extender, it works great with dual-band routers, too. It automatically senses channel congestion on the extender link and ramps down available bandwidth so traffic is balanced between router and extender.

NETGEAR's EX8000

As you would expect from NETGEAR, the EX8000 also has best-in-class features including MU-MIMO support, four Gigabit Ethernet ports, Wi-Fi Protected Setup (WPS) for push-button quick secure connections and a USB 2.0 port supporting NETGEAR's ReadyShare Print.

And if you already have Ethernet where you want it, the EX8000 can be switched into access point mode to use all three radios to provide up to 400 Mbps on 2.4 GHz, 866 Mbps on 5 GHz low band and 1733 Mbps on 5 GHz high band for device connection. If you don't have Ethernet, that's ok, too. Just connect the Nighhawk X6S to a LAN port on your old router, shut off its radios and get an instant upgrade to the latest in Wi-Fi technology. The EX8000 can bring tri-band, band steering and seamless roaming with single SSID to any router you have!

Learn more about the revolutionary NETGEAR EX8000 Nighthawk X6S AC3000 Tri-Band Wifi Range Extender, right now!

 

More Wireless

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors


Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have SpeedTouch 608wl and Asus AC-68U connected together and doing PPTP over PPPoA bridge. The bridge works. When I unplug telephone line (rj-12) pl...
Hey everyone,I couldn't really find a thread for this but I didn't look that hard honestlybut I'm wondering if I could downgrade my internet package t...
Hi everyone,I am using a VPN provider (PrivateVPN) but am noticing that VPN recovery isnt too good if the tunnel disconnects. What are the best VPNs a...
New Firmware R7800 NetgearNew Features and Enhancements:Supports the SMBv3 protocol.Updated the Speedtest logo on the QoS Setup page.Bug Fixes:Fixes t...
Basically I'm trying to only block web browsing on a single LAN wired device. So anytime someone pulls up a web browser and types in a standard port 8...

Don't Miss These

  • 1
  • 2
  • 3
Get Backblaze Now!